1 motorola thyristor device data
reverse blocking triode thyristors . . . designed for industrial and consumer applications such as temperature, light and speed control; process and remote controls; warning systems; capacitive discharge circuits and mpu interface. ? center gate geometry for uniform current density ? all diffused and glass-passivated junctions for parameter uniformity and stability ? small, rugged, thermowatt construction for low thermal resistance, high heat dissipation and durability ? low trigger currents, 200 m a maximum for direct driving from integrated circuits maximum ratings (t j = 25 c unless otherwise noted.) rating symbol value unit peak repetitive forward and reverse blocking voltage (1) (t j = 40 to 110 c) (1/2 sine wave, r gk = 1 k w ) mcr310-6 mcr310-8 mcr310-10 v drm or v rrm 400 600 800 volts on-state rms current (t c = 75 c) i t(rms) 10 amps peak non-repetitive surge current (1/2 cycle, 60 hz, t j = 40 to 110 c) i tsm 100 amps circuit fusing (t = 8.3 ms) i 2 t 40 a 2 s peak gate voltage (t 10 m s) v gm 5 volts peak gate current (t 10 m s) i gm 1 amp peak gate power (t 10 m s) p gm 5 watts average gate power p g(av) 0.75 watt operating junction temperature range t j 40 to +110 c storage temperature range t stg 40 to +150 c mounting torque 8 in.-lb. thermal characteristics characteristic symbol max unit thermal resistance, junction to case r q jc 2.2 c/w thermal resistance, junction to ambient r q ja 60 c/w 1. v drm and v rrm for all types can be applied on a continuous basis. ratings apply for zero or negative gate voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the anode. blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. order this document by mcr310/d
semiconductor technical data ? motorola, inc. 1999
case 221a-09 (to-220ab) style 3 scrs 10 amperes rms 400 thru 800 volts c g a k a g rev 1
2 motorola thyristor device data electrical characteristics (t c = 25 c, r gk = 1 k w unless otherwise noted) characteristic symbol min typ max unit peak forward blocking current (1) t c = 110 c (t j = 110 c, v d = rated v drm )t c = 25 c i drm e e e e 500 10 m a m a peak reverse blocking current (1) t c = 110 c (t j = 110 c, v r = rated v rrm )t c = 25 c i rrm e e e e 500 10 m a m a on-state voltage (i tm = 20 a peak, pulse width 1 ms, duty cycle 2%) v tm e 1.7 2.2 volts gate tri gger current, continuous dc (2) (v d = 12 v, r l = 100 w ) i gt e 30 200 m a gate tri gger v oltage, continuous dc (v d = 12 v, r l = 100 w ) (v d = rated v drm , r l = 10 k w , t j = 110 c) v gt e 0.1 0.5 e 1.5 e volts holding current (v d = 12 v, i tm = 100 ma) i h e e 6 ma critical rate of rise of forward blocking voltage (v d = rated v drm , t j = 110 c, exponential waveform) dv/dt e 10 e v/ m s gate controlled turn-on time (v d = rated v drm , i tm = 20 a, i g = 2 ma) t gt e 1 e m s 1. ratings apply for negative gate voltage or r gk = 1 k w . devices shall not have a positive gate voltage concurrently with a negative voltage on the anode. devices should not be tested with a constant current source for forward and reverse blocking capability such that the voltage applied exceeds the rated blocking voltage. 2. does not include r gk current. figure 1. average current derating figure 2. on-state power dissipation figure 3. normalized gate current figure 4. gate voltage 0.3 120 0.5 1 2 40 20 0 20 40 60 80 90 100 3 140 v d = 12 vdc 8 t j , junction temperature ( c) 024 110 6 70 80 90 100 10 120 i t(av) , average on-state current (amps) a = 30 180 dc a = conduction angle 0.6 a 0.1 0.2 0.3 0.4 0.5 40 0.7 60 40 20 0 100 20 60 80 120 v d = 12 vdc 02 4 6 8 16 t j , junction temperature ( c) 0 4 8 12 20 a a = conduction angle 10 i t(av) , average on-state current (amps) 90 180 dc t , maximum case temperature ( c) c normalized gate current p , average power dissipation (watts) av v , gate trigger voltage (volts) gt 60 a = 30 60 90
3 motorola thyristor device data package dimensions case 221a-09 (to220ab) issue z style 3: pin 1. cathode 2. anode 3. gate 4. anode notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: inch. 3. dimension z defines a zone where all body and lead irregularities are allowed. dim min max min max millimeters inches a 0.570 0.620 14.48 15.75 b 0.380 0.405 9.66 10.28 c 0.160 0.190 4.07 4.82 d 0.025 0.035 0.64 0.88 f 0.142 0.147 3.61 3.73 g 0.095 0.105 2.42 2.66 h 0.110 0.155 2.80 3.93 j 0.018 0.025 0.46 0.64 k 0.500 0.562 12.70 14.27 l 0.045 0.060 1.15 1.52 n 0.190 0.210 4.83 5.33 q 0.100 0.120 2.54 3.04 r 0.080 0.110 2.04 2.79 s 0.045 0.055 1.15 1.39 t 0.235 0.255 5.97 6.47 u 0.000 0.050 0.00 1.27 v 0.045 1.15 z 0.080 2.04 q h z l v g n a k 123 4 d seating plane t c s t u r j
4 motorola thyristor device data motorola reserves the right to make changes without further notice to any products herein. motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. atypicalo parameters which may be provided in motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. all operating parameters, including atypicalso must be validated for each customer application by customer's technical experts. motorola does not convey any license under its patent rights nor the rights of others. motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the motorola product could create a situation where personal injury or death may occur. should buyer purchase or use motorola products for any such unintended or unauthorized application, buyer shall indemnify and hold motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that motorola was negligent regarding the design or manufacture of the part. motorola and are registered trademarks of motorola, inc. motorola, inc. is an equal opportunity/affirmative action employer. mfax is a trademark of motorola, inc. how to reach us: usa / europe / locations not listed : motorola literature distribution; japan : motorola japan ltd.; spd, strategic planning office, 141, p.o. box 5405, denver, colorado 80217. 13036752140 or 18004412447 4321 nishigotanda, shinagawaku, tokyo, japan. 81354878488 customer focus center: 18005216274 mfax ? : rmfax0@email.sps.mot.com touchtone 1 6022446609 asia / pacific : motorola semiconductors h.k. ltd.; silicon harbour centre, motorola fax back system us & canada only 18007741848 2, dai king street, tai po industrial estate, tai po, n.t., hong kong. http://sps.motorola.com/mfax/ 85226629298 home page : http://motorola.com/sps/ mcr310/d ?
|
